DVL A125🔗
Description🔗
The DVL A125 is the next step up from the DVL A50, providing better performance at greater distances while still keeping a small form factor relative to competing DVLs.
The DVL A125 builds on the DVL A50 with increased performance, a small 4-beam setup, an open interface protocol, and mid-to-low cost.
Tip
Keep the DVL A125 in a bucket of water to ensure sufficient cooling when using the DVL on a workbench.
Dimensions🔗
Cable dimensions🔗
Delivered cable length: 3.0 m
Cable diameter: 7.8 mm +/- 0.2 mm
Mounting holes🔗
Transducer numbering🔗
Mechanical drawings number the transducers from 1 to 4. Protocol messages and diagnostic logs use zero-based transducer id values from 0 to 3. See Transducer numbering and protocol IDs.
Transducer beam width🔗
Half-power beam width is 4.1°
Line of sight🔗
